dripsealpjs43

Recommended for sealing cast iron pipe joints as most economical Lead Substitute

FIRST TIME IN INDIA

Cold application. Available in two pack system, just mix both parts homogeneously and fill in the joint.
Easy to apply with over all less labour cost.
High bonding strength.
Low density as 1.95 gm/c.c. as compared to Lead 11.35 gm/c.c., so 1.95/11.35=1/5.82, nearly 1/6th consumption and the resultant cost is very much economical.
Low transportation cost.
No heating, no pollution, so it is environment friendly.
Chemical resistance.

It is polymer based and available in two pack system.
Excellent bonding strength to almost all surfaces such as concrete, plaster, bricks, asbestos, wood, stone, metals etc.
Being a lightweight system, it does not add to the weight of structure like tar felt and cement based waterproofing materials.
It is fire retardant, so it does not help fire like tar felt.
Completely jointless system, irrespective of area of structure.
Resistance to acidic rain as well other mild chemicals.
Due to off white color, low heat absorption as compared to black/brown colored treatments.
It is resistance to ultra-violet rays.
Coating is not effected even if water remains stagnant (tar felt and water based polymers are not effective for such site conditions).
Its coating remains flexible, so it is suitable to cover hairline cracks.
Cured film is flexible but abrasion resistance to normal use. However dumping of store materials over the coated roof should always be avoided.
Effective for negative pressure like basement.
It can be reinforced with fiber, if desired.
It prevents fungal and vegetable growth.
Effective for ten years on exposed surface.

Terrace, roof, wall, floor, lift pit, basement, parapet, wall, chhajja, Asbestos Cement sheet sheds, valley gutters, brick tilled roof, terrace garden, swimming pool, created waterfall.
Water tank, water retaining structure, sunken slab, toilet.
Corrosion protection of concrete and M.S. Structures, water tank, vehicle, pipeline.
Waterproofing of Dom/RCC structures of geometrical shapes.

DRIPSEAL-MC-97

Single pack and ready to use.
Excellent bonding strength with concrete, bricks or brick tiles, asbestos, wood, plaster, and natural stone.
The coating is transparent after setting.
Can be easily applied even by unskilled labour, with nominal instructions.
Although coating is flexible, yet it is resistance to normal abrasion.
Completely jointless system, irrespective of area and shape of structure.
It does not oxidizes or embrittle with aging.
It is non toxic, so environment friendly.
Effective for more than five years.
Long shelf life.